What Buildings Must Comply with Washington State CBPS?

Does my building have to comply with Washington State CBPS?

The answer depends primarily on your building’s size and use.

Washington divides covered properties into Tier 1 and Tier 2 buildings, with different requirements and compliance dates for each. Tier 1 requirements have already begun, while the first Tier 2 deadline arrives in 2027.

Here is what Washington building owners need to know.

What Is the Washington Clean Buildings Performance Standard?

The Washington Clean Buildings Performance Standard (CBPS) is a statewide building energy performance program administered by the Washington State Department of Commerce.

The standard is based on ASHRAE Standard 100-2018, with Washington-specific requirements incorporated through WAC 194-50.The state released an updated 2026 version of the standard that includes revisions to exemptions, extensions, compliance pathways, definitions, and reporting requirements.

Unlike a basic benchmarking ordinance, CBPS goes beyond simply reporting how much energy a building uses.

Depending on the building's tier, owners may need to benchmark energy use, develop an energy management plan, implement an operations and maintenance program, and in the case of Tier 1 buildings, demonstrate compliance with an energy performance requirement.

Which Buildings Are Tier 1 Under Washington CBPS?

A Tier 1 covered building is generally a building in the state of Washington where the combined:

  • Nonresidential

  • Hotel

  • Motel

  • Dormitory

floor area exceeds 50,000 gross square feet, excluding parking garage area.

That means many larger commercial properties can fall under Tier 1, including offices, retail buildings, warehouses, hotels, schools, healthcare facilities, and other nonresidential properties.

The key point is that the threshold is based on the applicable building floor area excluding the parking garage.

Tier 1 CBPS Deadlines

Washington phases Tier 1 compliance according to building size:

  • More than 220,000 sq. ft.: June 1, 2026

  • More than 90,000 but no more than 220,000 sq. ft.: June 1, 2027

  • More than 50,000 but no more than 90,000 sq. ft.: June 1, 2028

After the initial compliance cycle, reporting repeats every five years.

For owners of buildings above 220,000 square feet, the first CBPS deadline has therefore already occurred.

Which Buildings Are Tier 2?

Washington expanded the program beyond large commercial properties by creating Tier 2.

Tier 2 generally includes buildings where the combined multifamily residential, nonresidential, hotel, motel, and dormitory area is more than 20,000 square feet but does not exceed 50,000 square feet, excluding parking garage area.

Importantly, multifamily residential buildings larger than 50,000 square feet are also included in Tier 2.

This means a 30,000-square-foot office building and a 75,000-square-foot apartment building may both fall under Tier 2, even though they are very different sizes.

Tier 2 CBPS Deadline

The initial Tier 2 reporting deadline is:

July 1, 2027

This applies to covered buildings between approximately 20,000 and 50,000 square feet and multifamily residential buildings over 20,000 square feet. Compliance repeats every five years thereafter.

Tier 1 and Tier 2 Requirements Are Different.

Being covered by CBPS does not mean every building has identical requirements.

Tier 1 Requirements

Tier 1 building owners generally must:

  1. Benchmark the building's energy use using ENERGY STAR Portfolio Manager.

  2. Develop and implement an Operations and Maintenance Program.

  3. Develop and implement an Energy Management Plan.

  4. Demonstrate compliance with an applicable energy performance metric.

Washington currently provides several Tier 1 performance compliance pathways, including meeting the building's Energy Use Intensity Target, following the Investment Criteria pathway, demonstrating a minimum weather-normalized energy-use reduction, or qualifying through the state's space-heating electrification pathway.

The Investment Criteria pathway can involve an ASHRAE Level 2 energy audit and evaluation of cost-effective energy efficiency measures.

In other words, Tier 1 CBPS compliance can require substantially more work than simply uploading utility data.

Tier 2 Requirements

Tier 2 requirements are currently more focused on establishing good energy-management practices.

Tier 2 buildings must:

  1. Benchmark energy use.

  2. Develop and implement an Energy Management Plan.

  3. Develop and implement an Operations and Maintenance Program.

However, Tier 2 buildings are not currently required to meet an energy performance target.

That distinction is important. A Tier 2 owner should not assume the building has the exact same performance obligations as a Tier 1 property.

Are Any Buildings Exempt from Washington CBPS?

Yes.

Federal buildings and buildings owned by federally recognized tribes are not required to comply with the standard. Washington also provides a number of building-specific exemption pathways.

Depending on the circumstances, exemptions may be available for properties involving issues such as lack of occupancy, certain industrial or manufacturing uses, agricultural uses, pending demolition, or qualifying financial hardship.

However, an exemption should not simply be assumed.

Owners generally must apply through the Clean Buildings Portal and provide supporting documentation. Exemptions are also issued for a specific compliance cycle rather than permanently removing a building from the program.

What If a Building Has Multiple Uses?

Mixed-use properties can make the Washington State CBPS requirements more complicated.

For example, a building could contain office space, retail, residential units, a hotel component, and parking. Determining whether the building is Tier 1 or Tier 2 may require separating the applicable floor areas and determining which portions count toward each threshold.

Parking garage area is excluded from the Tier 1 and Tier 2 size thresholds.

Owners should therefore avoid determining coverage solely from a commercial real estate listing that shows a single total building square footage. The square footage used for CBPS purposes may not be identical to the property's advertised total area.

What Should Washington Building Owners Do First?

If you are unsure whether your property is covered, start with three pieces of information:

Building use, gross floor area, and parking garage area.

From there, determine whether the property meets the Tier 1 or Tier 2 definition and identify the applicable compliance deadline.

If it is covered, waiting until the reporting deadline to begin can create problems. Benchmarking may require collecting whole-building utility data, while the Energy Management Plan and O&M requirements require actual documentation and implementation.

Tier 1 buildings may require even more lead time if energy performance improvements, an ASHRAE Level 2 audit, or another compliance pathway is necessary.

Washington CBPS Is More Than a Benchmarking Requirement

One of the biggest misunderstandings about the Washington Clean Buildings Performance Standard is that it is simply another annual energy-reporting ordinance.

It isn't.

Benchmarking is one part of the process, but CBPS is designed to address how buildings are operated, maintained, managed, and ultimately how they perform.

For building owners, the first step is figuring out exactly where the property fits:

Tier 1, Tier 2, exempt, or not covered.

Once that question is answered, the compliance path becomes much clearer.

James Horan

A UC Irvine Social Ecology grad, published researcher, and Dean’s List honoree with experience in psychology, planning, and B2B design.

Next
Next

What the 2026 Refrigerant Rules Mean for Commercial Building Owners